Step 1: Edit Your Event
From your LumaBooth dashboard, select Settings using the gear icon.
Select Edit Event.
Step 2: Open Print Setup
From the drop-down menu, select Print Setup.
Step 3: Select Your AirCastPro Printer
Under Select print method, choose AirPrint.
Press the Change printer button.
Select your AirCastPro printer.
Your AirCastPro printers may appear as multiple printer options for different print sizes or configurations.
For example:
DNP_DS620
DNP_DS620_2x6-2
Printing Multiple Sizes or Layouts: LumaBooth and AirCastPro 3 can be configured to send different print sizes or layouts to separate AirCastPro printer configurations from the same event.
After configuring your primary AirCastPro printer, complete the following steps:
Add Your Secondary Printer
In Print Setup, under Select print method, select SECONDARY PRINTER.
Press the Change printer button.
Select the AirCastPro printer configured for the desired secondary print size or printer configuration.
Assign a Layout to the Secondary Printer
Open your Event Settings.
Select Print Layout.
Select the layout you want to send to the secondary printer.
Tap the Printing button.
Enable Print to Secondary Printer.
The selected layout will now print to the secondary AirCastPro printer. Layouts that do not have Print to Secondary Printer enabled will print to your primary AirCastPro printer.
No Printers Detected?
If no printers are detected, make sure your iPad is connected to the AirCastPro hotspot.
If you are still unable to detect a printer, view the troubleshooting guide: